Cold-rolled silicon steel sheet

Product Features

Cold-rolled silicon steel sheets: 30%-50% higher permeability, 40%-60% lower core loss than hot-rolled types, stable at 50Hz-400Hz for better efficiency. Fine, oriented grains (especially grain-oriented) ensure magnetic uniformity, reducing vibration/noise. Superior surface (±0.01mm tolerance) for precision lamination. Compatible with high-precision processing and automated stacking for complex designs. Insulating coating (≥400V breakdown) resists rust/heat, cutting eddy current loss.

Product Classification

• By crystal orientation：Grain-oriented (GOSS texture, excellent permeability in rolling direction, ultra-low core loss, for transformer cores); non-oriented (isotropic magnetic properties, for motor/generator rotors and stators).
• By core loss level：Standard grade (e.g., 35W300, 3.00W/kg@50Hz); high-efficiency grade (e.g., 35W250, 2.50W/kg@50Hz); ultra-high efficiency grade (e.g., 35W130, 1.30W/kg@50Hz).
• By thickness：Ultra-thin (0.18mm-0.23mm, for high-frequency transformers); standard (0.30mm-0.35mm, general purpose); thick (0.50mm-0.65mm, for large motors).

After-sales Service

• Quality control：Each batch passes core loss, permeability, and coating adhesion tests, with third-party reports; core loss deviation ≤±3%.
• Technical support：Provides core design simulation and loss calculation services, assisting in optimizing lamination methods to reduce eddy current loss.
• Supply guarantee：Grain-oriented sheets delivered within 7 days, non-oriented sheets shipped within 48 hours; supports slitting customization and full-roll supply.